CARVIN
Sign in
Moderate2 steps·Original on iFixit ↗

Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement

Use this guide to disassemble the wheel and get access to the interior components of your Thustmaster Ferrari 458 Spider Racing Wheel.

Tools (3)

Step-by-step instructions

Step 1 · photo 1
1
  • Remove the black 10mm using a JIS #1 screw driver.
  • There are 12 screws.
  • Two of the screws are deep inside the device you might need to use a slim screwdriver.
  • In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.
Step 2 · photo 1Step 2 · photo 2
2
  • Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.
  • Gently pull apart both halves of device to access inside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Guide content belongs to iFixit, license CC BY-NC-SA. Open original

Замена нижней крышки гоночного руля Tustmaster Ferrari 458 Spider — Carvin Garage · Carvin