CARVIN
Easy45 min5 steps·Original on iFixit ↗

Cabin air filter replacement for a SEAT Cordoba II (2002-2009)

Tools (1)

  • Destornillador torx T-20 4x100 buy ↗

Parts (1)

  • Filtro Bosch R 2357 o similar buy ↗

Step-by-step instructions

Step 1 · photo 1Step 1 · photo 2
1

Locating the filter

  • The cabin air filter is located in the passenger side footwell
Step 2 · photo 1Step 2 · photo 2Step 2 · photo 3
2

Removing the cover

  • Remove the cover by loosening the four screws that hold it in place, keeping track of where they go to replace them in the some holes.
  • Once that the screws are removed, the cover will come down.
Step 3 · photo 1Step 3 · photo 2Step 3 · photo 3
3

Removing the filter

  • Now with more room to remove it, slide the two plastic tabs together.
  • When the two plastic tabs are in the middle pull the filter cover down.
Step 4 · photo 1Step 4 · photo 2
4

Removing the filter II

  • Remove the filter.
  • Once you remove the filter make sure to notice the direction of the air-flow arrows so that you install the new one in the same direction.
Step 5 · photo 1
5

Re-assembly

  • To install the new filter follow the previous steps in reverse. If the filter and the plastic cover don't install fully, it is possible that it is installed backwards.
  • When re-installing the cover re-insert the tab and push upwards. Then reinstall the screws.

Guide content belongs to iFixit, license CC BY-NC-SA. Open original