1
- Remove the battery cover by pressing down on the lever located on the top of the cover.
- Apply pressure until it clicks out of place, and pull it off.
PowerA Enhanced Wireless Controller L and R Thumbstick Cover Replacement
This guide will show you how to access and replace the L and R thumbstick covers on your PowerA Enhanced Wireless Controller. If your thumbsticks are sticking or causing drift, you may need to remove the covers to clean or replace them. Replacing worn-out thumbstick covers can improve gameplay performance.
The components involved in this replacement are small, so a steady hand and good organization are essential. Performing this repair yourself can save both time and money. Be sure to purchase the correct replacement parts in advance from the Xbox website or a local gaming store.
Запчасти (1)
- PowerA Enhanced Wireless Controller L and R Sticks купить ↗
Пошаговая инструкция
1
- Pull the L and R stick covers out of the socket.
2
- Remove all eight screws using the J0 screwdriver.
3
- Insert the iFixit opening tool into the seam and gently pry the cover plate up.
- Remove the cover plate once it is loosened.
4
- Remove all three screws securing the motherboard using the J00 screwdriver.
- Remove the motherboard.
Завершение
To reassemble your device, follow these instructions in reverse order.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал