1
- Turn off the vehicle by removing the keys from the ignition.
- Open the back trunk door.
2002-2004 Nissan Xterra Taillight Replacement
The rear indicator light of a vehicle communicates the driver’s intention to stop or change lanes. Indicator taillights stop working after many years of use and driving without a taillight is dangerous. This guide provides a user- friendly step-by-step manual of how to replace your taillight on a 2002-2004 Nissan Xterra. This a hazard-free fix that only uses two tools listed below.
Tools (1)
- 10-mm Socket Wrench buy ↗
Parts (1)
- Taillight Bulb buy ↗
Step-by-step instructions
2
- Use the 10 mm wrench to remove the two screws on the back panel.
3
- Gently, but firmly push the assembly to loosen the plastic alignment pins.
4
- Remove the taillight socket from the taillight assembly by rotating it counterclockwise and lifting the socket out.
5
- Remove the defective light bulb from the socket by pulling up on the socket.
6
- Insert the new light bulb into the same socket.
7
- Test the light bulb by turning the headlights of the car on. If it lights up, it properly works.
8
- Once the flanges are lined up, press in the socket and turn clockwise to lock in place.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original