1
- Run the engine for a few (~5) minutes, then turn it off.
- This allows the oil to drain easier.
- Do not work on the car while the engine is running.
2012 Ford Focus Oil And Filter Change
In this guide, I will demonstrate how to perform an oil and oil filter change for a 2012 Ford Focus. This guide is applicable to all body and trim styles of the same year.
It is recommended that you change your oil every 4000 - 6000 miles and that you change your oil filter approximately every 10000 miles. You should use 5W-20 oil whenever changing or adding oil. Different manufacturers will have different name and part numbers for their compatible oil filters, so you should consult the parts counter at your auto parts store to determine which ones will fit your vehicle.
A carjack is not necessary to perform this procedure, the drainage bolt and oil filter can be easily reached underneath the front bumper of the car.
Пошаговая инструкция
2
- Take off the oil cap from under the hood of the car.
3
- Place the oil drain pan underneath the drainage bolt.
4
- Remove the drainage bolt using the 15mm wrench.
5
- Allow the oil to drain into the oil drain pan.
- This may take several minutes.
6
- Remove the old oil filter with the oil filter wrench once the oil has completely drained.
7
- Put a thin film of oil around the edge of the new oil filter.
- This allows for a better seal once the new filter is attached.
8
- Attach the new oil filter using the oil filter wrench.
9
- Reattach the drainage bolt with the 15mm wrench.
10
- Place the funnel into where you removed the oil cap and pour in approximately four (4) quarts of oil.
11
- Check the dipstick and ensure that the fill level is between the two holes. Add more oil if needed.
Завершение
Take the car for a short drive after you are done and check for leaks.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал