1
- Before you begin, make sure the generator is switched off and the generator is cool to the touch.
How to Change the Oil for the Honda EU2200IT A2
This guide shows how to change the engine oil for the Honda EU2200IT generator. This procedure is a prerequisite for many other repairs.
Oil specifications:
SAE 10W-30
0.46 US quarts (0.44 L)
Запчасти (1)
- Motor Oil 1qt 10W-30 купить ↗
Пошаговая инструкция
1
Remove the maintenance cover
- Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.
1
Drain the engine oil
- Unscrew and remove the oil filler cap.
2
Disconnect the spark plug
- Lift and remove the spark plug cover.
2
- Swing the top of the maintenance cover out.
- Remove the maintenance cover.
2
- Place an oil pan below the fill port to catch the engine oil.
- Carefully tilt the generator towards the oil pan to drain the oil.
3
- Grab the plastic housing at the end of the spark plug wire.
- Pull firmly to disconnect the wire from the spark plug.
3
- During reassembly, be sure to refill the engine oil:
- If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.
- Use SAE 10W-30 oil, up to 0.46 US quarts.
- Add oil until the dipstick is almost completely submerged.
Завершение
To reassemble your device, follow these instructions in reverse order.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал