1
Remove the front cover
- Use a 10 mm socket to remove the four capped nuts securing the front cover.
- Remove the front cover.
Honda 3000 Watt Inverter Generator EU3000IS1AWK Battery Replacement
This guide shows how to remove and replace the starter battery for the Honda EU3000IS1AWK 3000 watt generator.
Some images in this guide may show the lower plate removed from the generator. You do not need to remove the lower plate for this procedure.
Before you begin, make sure the generator is switched off and the generator is cool to the touch.
Parts (1)
- Honda BATTERY (YTZ10S) (YUASA)(MSDS) 31500-MCJ-643 buy ↗
Step-by-step instructions
1
Remove the battery
- Use an 8 mm socket to disconnect the battery wires from the battery terminals.
- Disconnect the black negative cable first to prevent the risk of shorting the battery.
- During reassembly, connect the black negative cable first. Make sure you reconnect the wires in the correct polarity.
2
- Unclip the battery strap from the lower plate.
3
- Remove the battery.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original