1
- Open the top plastic cover and remove the record and rubber mat.
Audio-Technica AT-LP60BK-BT Belt Drive Replacement
This guide will deal with how to replace the broken or missing belt drive for Audio-Technica AT-LP60BK-BT Bluetooth Wireless Turntable. The rubber band could cause a malfunction and break after using a long time or under extreme temperatures.
Before using this guide, make sure the size of the new belt is designed specifically for this model to avoid motor overheat problem.
Запчасти (1)
- Audio Technica AT-LP60BK-BT Belt купить ↗
Пошаговая инструкция
2
- Find the belt underneath the platter by rotating the platter to the correct place.
- Remove the belt from the motor pulley.
3
- Take the platter off by pulling it straight up.
4
- Remove the old belt.
5
- Turn platter upside down.
6
- Place the new belt around the inner lap on the upside-down platter.
- Make sure the rubber band is flat on the platter, with no flipping.
7
- Turn the platter around.
- Grab the belt around with a finger through one of the holes in the platter.
8
- Put the platter straight down.
9
- Put the belt around the motor pulley.
10
- Test the function by spinning the platter and put the rubber mat into place.
Завершение
To reassemble your device, follow these instructions in reverse order.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал