CARVIN
Moderate20 - 40 minutes10 шагов·Оригинал на iFixit ↗

Hyundai Santa Fe Sport Brake Light Replacement

Use this guide to replace the brake light bulb on the Hyundai Santa Fe Sport.

The brake lights are something that frequently needs replacing compared to other parts and it is important to make sure your brake lights are functioning properly. It will become dangerous to drive around in a car with no brake lights.

There are many other light bulbs to be used as brake lights available, but the one I recommend is the Sylvia 2357 long life mini bulb.

Инструменты (2)

Запчасти (1)

Пошаговая инструкция

Шаг 1 · фото 1Шаг 1 · фото 2Шаг 1 · фото 3
1
  • Open the trunk.
  • Remove the black plastic cover located on the inner side taillight by using a #2 flat head screwdriver.
  • Make sure to pry it off gently to avoid cracking the plastic cover.
Шаг 2 · фото 1Шаг 2 · фото 2Шаг 2 · фото 3
2
  • Remove the two 12 mm Phillips # 2 screws holding the taillight in place.
Шаг 3 · фото 1
3
  • Slide out the headlights placing one hand on the outer side and the other hand gripped onto the back of the taillight, pulling straight out.
  • For easier removal, press down with force on the outer side of the headlight.
Шаг 4 · фото 1Шаг 4 · фото 2Шаг 4 · фото 3
4
  • Turn the grey brake light socket with the multi-colored wires connected to it counterclockwise.
Шаг 5 · фото 1Шаг 5 · фото 2
5
  • Pull out the light bulb from the grey bulb socket by pushing downwards while turning counterclockwise.
Шаг 6 · фото 1Шаг 6 · фото 2
6
  • Take the new replacement bulb and insert it into the light socket while pushing down onto the bulb, turning clockwise and securing the bulb in place.
Шаг 7 · фото 1Шаг 7 · фото 2
7
  • Slide the light socket back into the circular compartment, making sure the bulb is facing inwards.
  • After inserted, turn it clockwise to lock the bulb back into place.
Шаг 8 · фото 1Шаг 8 · фото 2Шаг 8 · фото 3
8
  • Slide the taillight back into the starting position.
  • Align the taillight with a circular piece on the outer side of the car.
  • Use moderate force while sliding the taillight, making sure screw holes are visible.
  • Make sure the grey circular piece on the side is aligned with the taillight to avoid damaging the taillight.
Шаг 9 · фото 1Шаг 9 · фото 2
9
  • Take the two 12 mm Phillip #2 screws and place them back into the two visible holes.
Шаг 10 · фото 1Шаг 10 · фото 2Шаг 10 · фото 3
10
  • Replace the plastic cover by pushing down on all of the corners.
  • Once the plastic piece is fixed onto the car, you can then close the trunk.
  • The plastic piece is secure when all the sides are lined up with the car and taillight.
  • Avoid applying a significant amount of force to prevent cracks in the plastic.

Завершение

You have now completed the guide, to replace the brake bulb on your 2012 - 2018 Hyundai Santa Fe Sport.

Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал