1
- Pull out the hood release in the driver's footwell to pop open the hood.
Fourth Generation (2011 - 2017) Honda Odyssey Engine Air Filter Replacement
The following instructions describe how to perform the replacement of an engine air filter on a fourth-generation Honda Odyssey. The engine air filter collects dirt and debris in order to prevent it from entering the engine and requires replacement after a certain amount of time. Before attempting this task, be sure to allow the vehicle to cool down to avoid getting burned.
Step-by-step instructions
2
- Release the hood latch to lift the hood.
- To avoid difficulty finding the latch, search near the center of the hood.
3
- Position hood prop rod into the support hole.
- Hoods are heavy and the securement of the prop rod is necessary to prevent injury.
4
- Unlatch the three clips securing the engine air filter cover. (The third clip can't be seen in the photo but is on the other side of the cover.)
- Be sure to allow the vehicle to cool down before working in the engine bay.
5
- Gently remove the air filter cover.
6
- Remove the filter by simply pulling it out of the filter compartment.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original