1
Prerequisites
- Before you begin, make sure the vehicle is turned off and placed in park with the parking brake engaged.
2018 Dodge Charger Headlight Bulb Replacement
Learn how to replace the headlight bulbs for a 2018 Dodge Charger. All that is required is to open the hood, locate the headlight compartment and replace an old headlight bulb with brand new ones.
This guide walks through the process for replacing the bulbs on both sides - the process differs between them. Skip to Step 9 for the driver's side bulb.
Note: The tools provided are the exact ones used during the repair. Feel free to explore options. The most important is for the socket to be 5/16 inches and compatible with the ratchet you are using to loosen the screws. Use a head flashlight in case you decide to work during the night.
Before beginning, turn off the car, place it in park, and engage the parking brake.
Tools (3)
Parts (1)
- Auxito 9005 LED Headlight Bulbs buy ↗
Step-by-step instructions
2
Open the hood
- Open the hood by pulling the release lever inside the vehicle, located on the driver's side by the parking brake.
- Once pulled, you will hear the sound of the hood pop open.
3
Pull the lever, lift the hood
- Carefully place your hands under the hood, towards the middle of the car.
- When you feel the lever, push it to the left using your left hand and slowly push the hood up with your right hand.
- If your Charger has or requires a stand, prop it up.
- This model of Charger does not require a stand to hold the hood. It will automatically hold on its own.
4
Unscrew the headlight cap
- On the passenger side of the car, unscrew the cap covering the headlight compartment.
- Remove the cap from the headlight.
- Use gloves to protect your hands.
5
Remove the old bulb
- Once you remove the cap, you will see the current bulb that is installed.
- Slowly twist the bulb clockwise, and remove it from the compartment.
6
Detach the bulb and adapter
- Unplug the bulb from the adapter.
- Lift the lever and carefully detach it.
- Place the bulb in a safe area away from the vehicle.
7
Reconnect a new bulb to the adapter
- Connect a new light bulb to the adapter.
8
Lock the bulb and cap in place
- Align the bulb to the shape of the hole and turn clockwise to safely lock.
- After installation, you will see cables sticking out. You can manage this by fitting it in the compartment.
- Place the cap back on the compartment and tightly seal it.
9
Accessing the driver's side bulb
- To access the driver's side lightbulb, you have to remove the air intake from under the hood.
10
Loosen the intake bolts
- Loosen two bolts using a 1/4 ratchet with a 5/16 inch socket.
- Gently loosen the bolt. Loosening it too quickly may result in the screw falling into the engine compartment.
11
Remove the bolts manually
- Once the screw is loosened, use your hand to continue the process.
12
Detach the intake tube
- Loosen the screw attached to the ring.
- Detach the tube from the intake.
- Do not remove the ring from the tube.
13
Lift the intake out
- Grab the intake with both hands and gently lift upwards.
- Place the intake safely on top of the main engine block.
14
Find the headlight compartment
- Once the intake is safely removed, you can access the headlight compartment.
15
Replace the bulb
- Remove the light bulb by lifting on the small lever.
- Connect the new headlight bulb and ***firmly*** align the bulb to the compartment.
- Double check that the bulb is properly installed and connected. If it is not installed properly, you will have to remove the intake again.
16
Realign the air intake
- Place the intake back in its original place.
- Align the bottom of the intake to its original spot as seen in the picture.
17
Tighten the intake screw
- Place the bolt and ring back on the intake.
- Tighten the screw with your hands and finish securing the screw using the 1/4 ratchet and the 5/16 in socket.
18
Reattach the intake tube
- Firmly attach the tube to the intake.
- Tighten the screw using the 1/4 ratchet with the 5/16 inch socket.
- Close the hood of the vehicle.
- Before closing the hood, make sure the engine compartment is clear of obstruction.
19
Test the new lightbulbs
- Power on the vehicle to ensure the new headlight bulbs are successfully working.
Conclusion
Congratulations, you've successfully replaced both lightbulbs!
Guide content belongs to iFixit, license CC BY-NC-SA. Open original