1
- Remove the protective case from the key fob.
- This step is optional; not everyone has a protective case.
Tesla Model S Key Fob Battery Replacement
Use this guide to assist in replacing the battery in a Tesla Model S keyless fob remote. A Tesla key fob assists the user in accessing their Tesla vehicle from a distance. The key fob also allows the user to perform various remote functions such as door unlock/lock as well as a front and rear trunk hatch open button. Due to everyday use, the fob may begin to operate intermittently over time. This may be a result of the battery needing to be replaced. There are no special skills or tools required to complete this task.
Инструменты (1)
- Spudger купить ↗
Запчасти (1)
- CR2032 Lithium Battery купить ↗
Пошаговая инструкция
2
- Insert the flat end of a spudger into the notch, and gently pry the key fob open along the seam.
- Separate the cover from the key fob.
3
- Insert the flat end of a spudger into the entry point at the top of the key fob.
- Lightly push the spudger under the battery.
- Remove the battery from the key fob.
4
- With your fingers, insert a new CR2032 battery into the opening.
- Ensure correct placement of the battery by having the writing facing up toward you and the blank side with a number facing down inside the battery opening.
- Push the battery with your thumb to lock it into place.
5
- To close the key fob, enter the wider side of the cover into the opening in the middle of the key fob.
- You should see the end of the cover a little popped out.
- With your thumb and pointer finger push together the cover and the key fob to allow for the key fob to be securely closed.
6
- This step is optional (not everyone has a case).
- Place the key fob into the opening of the case.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал