CARVIN
Easy10 - 15 min10 steps·Original on iFixit ↗

How to Replace 2009-2016 Audi A4 (B8) Windshield Wipers

It is common for plastic wiper blades to oxidize during seasonal temperature changes, and a pair of new wiper blades will help improve visibility during different weather conditions.

Follow this guide to replace the windshield wipers on your Audi A4 2009-2016 (B8) model. In this guide, we are using Michelin Wiper Blades purchased from Costco. If you are purchasing parts from another store, make sure that it fits the Audi wiper blades connector.

Parts (2)

  • Michelin 20 inches wiper blades buy ↗
  • Michelin 24 inches wiper blades buy ↗

Step-by-step instructions

Step 1 · photo 1Step 1 · photo 2Step 1 · photo 3
1
  • Go inside your car and press the “CAR” button on the control panel.
  • Scroll down using the control wheel to "Windshield wipers".
  • Press the center button on the control wheel to select the option.
Step 2 · photo 1Step 2 · photo 2Step 2 · photo 3
2
  • Press the center button on the control wheel to edit the service position.
  • In the drop-down menu, switch it from "off" to "on" by scrolling with the control wheel and pressing the center button.
  • The windshield wipers will now be in the up position.
Step 3 · photo 1Step 3 · photo 2Step 3 · photo 3
3
  • You should be able to lift the windshield wipers towards the windshield at 90 degrees.
  • Lift the windshield blades to about 120 degrees.
Step 4 · photo 1Step 4 · photo 2Step 4 · photo 3
4
  • In the packaging for the Michelin windshield wipers, the wipers are pre-installed with a top-lock connector.
  • Raise the pre-installed top-lock connector.
Step 5 · photo 1Step 5 · photo 2
5
  • Pinch the bottom of the connector to release the cover and remove the top-lock connector.
  • The Audi A4 uses a “Top Lock-Narrow” connector.
Step 6 · photo 1Step 6 · photo 2Step 6 · photo 3
6
  • Install the new "Top Lock-Narrow" connector onto the base connector.
  • Press down until it clicks into place.
Step 7 · photo 1Step 7 · photo 2
7
  • Install the blade into the blade arm, sliding the new wiper blades down until it clicks and is locked into place.
  • Make sure to install the 24 inches wiper blade on the driver side, and the 20 inches wiper blade on the passenger side.
Step 8 · photo 1Step 8 · photo 2Step 8 · photo 3
8
  • Install the new connector cover by pinching the base of the connector.
  • Close the connector cover on both sides of the wiper blades.
Step 9 · photo 1Step 9 · photo 2
9
  • Remove the yellow wiper protector on both blades.
  • Put the wiper back on the windshield
Step 10 · photo 1Step 10 · photo 2Step 10 · photo 3
10
  • Set the windshield wiper service position back to "off".

Conclusion

Test the new wiper blades before you hit the road for safety.

Guide content belongs to iFixit, license CC BY-NC-SA. Open original

Как заменить дворники Audi A4 (B8) 2009-2016 гг. — Carvin Garage · Carvin