1
- Open the trunk of your vehicle.
Taillight Bulb Replacement on a Volkswagen Jetta (2011 - 2018)
This guide will help you replace your taillight bulb on a Volkswagen Jetta (2011 - 2018). The most common problem on a vehicle is a burn-out taillight which can cause a safety hazard for other drivers on the road. Not only is this a safety hazard to other drivers but, you could also receive a fine from the Police.
By following this guide you will be able to replace your taillight bulb effortlessly without any special equipment/tools. This guide lists all the steps and includes detailed information and pictures of the process. It should take approximately 45 minutes to complete this repair but, it may take a little longer depending on your experience.
Tools (1)
Parts (1)
- Tail Light Bulb buy ↗
Step-by-step instructions
2
- Locate the fabric access cover.
- The fabric access cover is located right behind the the taillight.
3
- Gently pull out the access panel.
4
- Start unscrewing the large plastic screw counter-clockwise.
5
- Place the screw in a safe spot.
6
- Remove the taillight assembly by gently wiggling it out with both hands.
7
- Unplug the taillight power plug by pinching both tabs to release the plug.
8
- Pinch the two release tabs towards each other and lift the bulb bracket out of the tail housing.
9
- Gently turn the bulb counter-clockwise until you can pull it out.
- Don't squeeze the bulb too hard as it could break.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original