1
Remove the faceplate
- Pull on the left corner of the faceplate to remove it.
APC Smart-UPS SC 450VA Battery Replacement
The APC Smart-UPS is a reliable uninterruptible power supply that provides backup power and surge protection for electronic devices. However, like any battery-powered device, the battery inside the UPS will eventually wear out and need to be replaced. In this guide, we will walk you through the steps to replace the battery in your APC Smart-UPS SC 450VA, including how to remove the old battery and how to install the new battery. By following these steps, you can ensure that your UPS continues to provide reliable backup power for your devices.
Tools (1)
- Phillips #2 Screwdriver buy ↗
Parts (1)
- APC Replacement Battery Cartridge #18 buy ↗
Step-by-step instructions
2
Unscrew the battery cover
- Use a [product|IF145-373-48|PH2] screwdriver to unscrew the 4 screws securing the battery cover.
3
Remove the battery
- Use the pull tab to pull out the battery.
- Be sure to not pinch the cables between the case and the battery.
- Unplug the battery connector.
- Remove the battery.
- Caution: Don't jab the battery with any sharp tools. A punctured battery may leak dangerous chemicals.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original