1
- Open the tailgate.
- Remove the top and bottom T15 screws from each side of the tail lights.
- Gently remove the tail lights by pulling outward.
2021 Chevrolet Silverado Tail Light Replacement
This guide demonstrates step-by-step on how to change your tail lights. It is a relatively easy process and with this alone, you can change the actual tail lights themselves and any light within the taillight.
Step-by-step instructions
2
- Unplug the sockets and remove the reverse light bulb from the tail light.
3
- Plug the brake lights connector.
- Twist and secure the socket tightly.
- Plug in the turn signal bulb connector. Twist and secure tightly.
4
- Plug in the parking lights connector. Twist and secure the socket tightly.
- Plug in the TURN SIGNALS connector. Please follow the same steps for the other side of the tail lights.
- Make sure all the connections are plugged and tight. Also ensure that the caps are sealed.
5
- First, remove the reverse light bulb from the vehicle.
- Then, connect the socket to the reverse light connector from the new tail light.
6
- Lastly, plug the vehicle’s tail light socket to new tail light connector.
7
- Gently push the tail light into the mounting position and use T15 screwdriver to tighten the top and bottom screws.
- Repeat the same process for the other side of the tail light.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original