1
- Pull out the hood release latch located towards the lower left of the steering wheel.
2011 Toyota Sienna Headlight Bulb Replacement
If you need to replace a headlight bulb on your 2011 Toyota Sienna, follow this guide.
All headlight bulbs are certain to burn out at some point, and having working headlights is crucial for safe driving. The typical halogen bulb will last for roughly 1000 hours of operation or about five years. However, if you drive on rough roads frequently, they may burn out faster. It's best to replace them as soon as possible if one or both burn out to avoid accidents or a ticket.
Instead of going to a repair shop, save yourself time and money and try the repair yourself! Once you know how, the repair is fairly simple.
Before beginning this guide, ensure that you car's engine is turned off and in park. It's important to avoid touching the new bulbs as the oils on your hands and fingers might shorten the life of the bulb. The oils can create hot spots, causing the bulb to burn out faster.
Step-by-step instructions
2
- Hold up the hood safety latch with one hand and lift the hood of the car with the other hand.
- Pull the hood all the way up to ensure it engages and stays up.
3
- Locate the headlight bulb housings on each side if the hood.
- It's advisable to replace both headlights even if only one is burned out. The other light is likely to go out soon, and replacing both now can help avoid additional repairs.
4
- Push the button on the electrical connector until you hear a click.
- Pull down to remove the electrical connector.
5
- Twist the bulb counter clockwise.
6
- Pull out the bulb.
- Insert your new light bulb.
- If you are not wearing gloves, avoid touching the glass part of the bulb since the oils from your skin will damage the bulb.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original