1
- Ensure the car and headlights are turned off.
- Open the hood of your car.
2013-2018 Jeep Wrangler (JK) Headlight Replacement
If you find that your headlight bulb isn't emitting light, start by ensuring it's properly connected. Follow steps 1-3 in this guide to check. If it's connected correctly and still not working, it may need replacement.
This guide demonstrates how to replace it specifically for a 2018 Jeep Wrangler. Before you begin, remember to switch off your car and headlights.
Parts (1)
- XtraVision Headlight and Fog Light Bulb H13XV-2 buy ↗
Step-by-step instructions
2
- Locate the headlight connector. It's a plastic piece attached to the back of the headlight bulb.
3
- Carefully pull the headlight out from its socket. Hold the base of the bulb and gently pull straight back.
4
- Unplug the old headlight from the connector. It should come off easily by pulling it away from the connector.
5
- Place a new headlight into the connector where you removed the old one. Make sure it's properly aligned.
6
- Insert the new headlight back into the headlight socket. Push it in until it's snug and secure.
7
- Check to see if the headlight works. Turn on your car and headlights to test it.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original