1
Disassembly
- Huge thanks to [link|https://www.youtube.com/@korganlibrahim|@korganlibrahim|new_window=true] for allowing me to use his very well done teardown of the unit, which I also used to guide me.
If you are faced with a Tesla Gen 3 Wall Connector that is showing No Power and No Lights or Indicator LEDs it could be that a Fuse; the Offline Switch IC; the MOSFET has blown on the back of the main board.
In this repair scenario, a bug carcass was found fused to the Offline Switch IC which led to the Fuse blowing and the MOSFET along with it. The exact cause could be something else, but a good stories needs an agent.
To reassemble your device, follow these instructions in reverse order.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал