1
Glove Box Removal
- Open the front right door.
- Using a PH2 Phillips screwdriver, remove the following screws:
- 4 13 mm PH2 Phillips screws.
Nissan Tiida/Versa Cabin Air Filter Replacement
Use this guide to replace the cabin air filter in your Nissan Tiida/Versa. As the name suggests, its function is to filter impurities from the air entering the cabin through the air conditioning system. A dirty cabin air filter results in significantly lower air conditioning efficiency. Nissan recommends replacing the cabin air filter once a year, along with the oil change.
Images may vary depending on your vehicle's country and configuration.
Tools (1)
- Phillips #2 Screwdriver buy ↗
Parts (1)
- Filtro de Cabina Nissan para Versa/Tiida buy ↗
Step-by-step instructions
1
Filter Removal
- With your hand, grab the tab that sticks out from the body and push upwards.
- If it is stuck, you can use a pair of tweezers to help you push.
- Once loose, remove the filter by pulling on it.
- It is possible for a filter pleat to get caught. Do not worry.
2
- Open the cover and remove the remaining screws:
- 4 Phillips screws 17 mm PH2.
- The small metal tabs that secure the screws to the plastic may fall out. Be careful.
3
- With the lid open, pull the hook to unlock the glove box body.
- Once it has been released from the top, close the lid again.
- Grasp the glove box body from the bottom and pull it toward you to remove it from the dashboard.
- If your vehicle is equipped with a glove box light, [link|https://es.ifixit.com/Gu%C3%ADa/Reemplazo+de+la+Luz+de+Guantera+de+un+Nissan+Tiida-Versa/175729|follow this guide.|new_window=true]
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original