1
- Pull the hood release lever on the lower-left side of the dash.
2021-2025 Mazda CX-30 Engine Air Filter Replacement
Replacing the engine air filter on the 2021–2025 Mazda CX-30 is an important part of routine maintenance. A clogged or dirty air filter can reduce engine performance, lower fuel efficiency, and cause the engine to work harder than necessary. If you notice reduced acceleration, poor gas mileage, or if your vehicle has reached its recommended service interval, this replacement may be needed.
This procedure is straightforward and requires only basic tools. Be cautious when working inside the engine bay, as some components may be hot if the car has been recently driven. Always ensure the vehicle is turned off and the engine is cool before beginning.
This guide will walk you step-by-step through removing and replacing the engine air filter safely and correctly.
Запчасти (1)
- Mazda CX-30 cabin air filter купить ↗
Пошаговая инструкция
2
- Open the hood and use the hood prop rod to keep the hood open.
3
- Locate the air filter box and push both metal levers down to unlock the lid.
- Use caution, as the metal levers may spring back with force.
4
- Lift up the lid and pull out the air filter.
- Take care not to drop dirt into the air intake and watch for sharp edges on the housing.
5
- Pull out the old air filter.
6
- Slide the new air filter in and make sure the appropriate side is facing up.
- Slide the new air filter in and make sure the correct side is facing up.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал