1
- Use a #2 Phillips screwdriver to remove the four screws.
1999-2004 Volkswagen Golf Automatic Transmission Control Unit Replacement
Step-by-step instructions
1
- Use a flathead screwdriver to remove the cap from the windshield wiper.
1
- Lift up the plastic cover.
2
- Remove the rubber gasket from the rain tray.
2
- Use a socket wrench to release the passenger-side windshield wiper locking nut.
2
- Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.
- In a pinch, you can make this tool with a phillips driver bit and end wrench.
3
- Lift the tray upwards and away from the vehicle.
3
- Gently lift up the passenger-side windshield wiper.
3
- Use a #2 Phillips screwdriver to remove the front two screws.
4
- Remove the driver-side windshield wiper in the same fashion.
4
- Gently unplug and lift out the automatic transmission control unit.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original