1
Open the hood
- Pull the hood latch to release the front hood.
- Go around to the front of the car and trigger the lever to raise the hood.
- Lift the hood prop and insert the end into the hood.
1996-1998 Subaru Legacy Oil Change
Пошаговая инструкция
2
- Locate the oil drain plug underneath the vehicle.
- Put down some newspaper or cardboard to catch any spills or splashes
- Slide the oil pan under the drain plug.
3
- Take your 17mm socket and loosen the drain plug.
- Once loose enough, remove the plug by hand.
- The oil may be hot, so wear latex gloves when removing the plug.
- Let the oil drain out until its just a drip.
- Clean off the plug with a paper towel or rag.
- Re-screw drain plug back into the oil pan.
- Make sure it's not to tight or loose - check the owners manual for torque specifications.
4
- Locate the Oil Filter on the underside of the car.
- Remove the oil filter and let the oil drain out.
- Re-add the new, fresh oil filter.
5
- Add 4.8 Quarts of new oil.
Завершение
To reassemble your device, follow these instructions in reverse order.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал