1
- Remove the six screws from the underside of the console with a Phillips #1 screwdriver.
Sega Genesis Reset Button Repair
We all know that the Sega Genesis brought to us many hours of fun, but, as we get older, the reset button gets older too.
Today, let's lend a hand to our nice friend and replace its reset button!
Инструменты (1)
- Phillips #1 Screwdriver купить ↗
Пошаговая инструкция
1
- Using Philips screwdriver, remove 11 screws securing silver casing.
2
- Flip the Sega Genesis upright.
2
- Remove silver case.
3
- Gently lift the top casing.
- '''Note: the case will be connected to the main board by LED wires.'''
3
- Locate reset button on motherboard
4
- Bend out the LED leads into vertical positions.
4
- Place three pieces of 1cm x 1cm masking tape over reset button.
5
- Slide the LED wire apparatus off the lead pins.
- '''Note: observe which color wire corresponds with which length of pin.'''
6
- Separate the main board from the outer case.
Завершение
To reassemble your device, follow these instructions in reverse order. And the most important, be happy!
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал