1
- Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.
- Unclip the two clips to remove the battery cover.
X-street Lamborghini Murcielago LP670-4 SV Steering Column Spring Replacement
The steering column spring is responsible for reverting the wheels to a straight position when the remote is not turning one way or the other. A faulty steering column spring will fail to default to the straight position after turning the wheel.
Step-by-step instructions
1
- Unscrew the two 2.5mm Phillips #00 screws from each side
1
- Unscrew the three 2.5mm Phillips #00 screws from the white steering column.
- After removing the three screws, the steering column will pop out of position because of the springs underneath. To reassemble, put the springs back together as shown in picture #3.
1
- Remove the three 1.6mm Phillips #000 screws from the black motor casing.
2
- Unplug the battery by pushing on the clip.
2
- Remove the side skirt covers on each side of the car.
2
- Remove the front motor and its casing from the chassis of the car.
3
- Lift up and remove the two side skirts.
3
- Carefully remove the steering column spring.
4
- Unscrew the two 2.5mm Phillips #00 screws from the front skirt of the car.
5
- Lift the front part of the underbody and pull it out from the main underbody.
6
- Unscrew the remaining seven 9mm Phillips #00 screws from the underbody of the car.
- The second image shows a closer view of the rear three screws
7
- Lift the main underbody from the shell of the car.
- Lift up the body to expose the wiring and hardware underneath.
8
- Remove the reflective sticker from the top of the body.
9
- Unplug the wire connector.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original