1
- Begin by opening the hood of the car and locating the battery on the front of the driver side in the engine compartment
2011-2013 Scion tC Car Battery Replacement
Parts (1)
- 12V Car Battery buy ↗
Step-by-step instructions
2
- Using a socket wrench, loosen the 2 (5/16 inch) nuts on the top of the battery support bracket
- Remove the bracket by lifting up
3
- After removing the bracket, locate the supporting rod behind the battery
- The rod is hooked on a hole in the metal behind the battery. Unhook the rod and remove it
4
- Start with the negative terminal of the battery
- Loosen the nut on the negative terminal with a 10mm socket wrench
- Remove the wire by slightly twisting and pulling up
5
- Remove the cap from the positive terminal of the battery
- Using a 10mm socket wrench, loosen the nut on the positive terminal
- Remove the wire from the positive terminal by slightly twisting and pulling up
- Remove the battery by lifting it out of the engine compartment
Conclusion
To reassemble your device, follow these instructions in reverse order.
Guide content belongs to iFixit, license CC BY-NC-SA. Open original