1
- Flip the system over
Sega Genesis II Teardown
This is a Sega Genesis model 2. In this tear down you will be able to see what the inside of the Sega Genesis should look like.
Инструменты (1)
- Essential Electronics Toolkit купить ↗
Пошаговая инструкция
2
Removing the Screws
- Remove the four outer screws (you may want a small cup to keep your screws in.)
3
- Take plastic top off.
4
Removing the Screws
- Remove the nine inner screws.
5
- Remove metal piece.
6
- You now have access to your circuit board. (If you wish to remove the circuit board, continue.)
7
- Remove the two screws highlighted in picture to remove the circuit board.
8
- Lift the black piece of plactic up.
9
- Lift up the metal piece.
10
- You now have access to the inside of the bottom plastic piece.
11
Circuit Board
- This is the circuit board.
12
Reassemble
- Do the steps backwards to reassemble.
Контент гайда принадлежит iFixit, лицензия CC BY-NC-SA. Открыть оригинал